|
20FT Aluminum
Flagpole Sets
Telescoping
Flagpole | TopFlight
Replacement Parts | Five-Section
Flagpole
Proudly display any flag
for your home or business.
These flagpole sets are made in the
U.S.A.!
America's Elite
Telescoping Flagpole
Made In The USA by
American Engineered Products
7 Year Limited Warranty
 |
America's Elite flagpole
is great for homeowners and small
businesses.
Unlike other telescoping flagpoles, American's
Elite's "Easy Lock" system means no more push-buttons to struggle with and wear out.
The hard anodized or
powder coat finish is virtually maintenance free.
Rotating collars allow the flag to fly freely and tangle free.
|
|
Quality Features
Display one or two
flags.
No rope to break
or tangle.
No noisy hardware to bang against the pole.
|
|
The America's Elite
telescoping flagpole comes with a 7 year limited warranty.
CLICK
HERE to read the warranty details. (PDF
file)
Adobe Acrobat
Reader is required. The
flagpole is rated for 75 MPH
winds. The high strength aluminum alloy 6000 series with T6
temper is 30% stronger than most competitor’s current
products. The lower section of the flagpole is 3 inches in
diameter for even more strength. Most competitor's telescoping
flagpoles are smaller diameter. The strong
polycarbonate rotating collars are treated with a UV blocker for
extended life. Available in 3 Finishes
|
|
White Power Coat
|
Bronze
Anodized
|
Silver
|
Operating
Instructions
America's Elite Flagpole Usage Instructions.pdf
Adobe Acrobat
Reader is required.
The America's Elite
telescoping flagpole is design to extend and lock in place in
seconds.
|
|
Patented "Easy Lock" System
|
STEP 1: To raise the flagpole; first raise the
top section to its full extent allowing it to self index; slightly rotate counter clockwise; then lower
slightly to engage locking tabs.
It is not necessary to exert force to lock each section in place. Repeat with remaining sections.
STEP 2: To lower the pole; reverse the procedure in Step 1. Each section of the pole should be lowered slowly, not allowing sections to drop freely.
NOTE: Your America's
Elite flagpole can be lowered or removed for storage in the event of extreme weather conditions, i.e. before a tornado or hurricane.
|
|
Each America's
Elite
telescoping flagpole set
is Made in the USA
and includes:
-
20 FT
Exposed Height Telescoping Flagpole Rated at 75 MPH with a 3"
Diameter Lower section.
-
24" Ground Sleeve.
-
Red Ground Sleeve Cap
(used when the flagpole is removed to keep debris out of the hole).
-
Polycarbonate
Rotating Collars with Stainless Steel Flag
Clips for flying up to two flags.
-
3" Diameter
Anodized Gold Aluminum Ball Ornament.
-
3x5 FT Nylon
US Flag with Embroidered Stars and Sewn Stripes - also Made in the USA!
-
Instruction Sheet.
-
Warranty Card.
America's Elite Flagpole Installation Instructions.pdf
(65 kb)
Adobe Acrobat
Reader is required.
|
|
20 FT America's
Elite
Telescoping Flagpole Set
Silver - $224.95 each
White - $249.95 each
Bronze - $249.95 each
Please specify color with
order.
29 lbs. UPS Shipping weight OVERSIZE.
$35.00 flat UPS Ground shipping charge
to the
continental 48 States.
Flag Order Form
|
|
America's
Elite Flagpole
Locking Collar Clamp
Stainless
steel locking collar clamp prevents the America's Elite
flagpole from being lifted out of the ground sleeve. Attaches
around the top of the ground sleeve.
Locking
Collar Clamp
$10.00 each
Flag Order Form
|
20'
TopFlight™ Flagpole
Replacement Parts
We no longer
carry the TopFlight™ telescoping flagpole.
However, we will still carry some replacement parts for a while. Availability is limited to parts on-hand.
| Part
# |
Description |
Unit
Cost |
QTY
Available |
FP010-1 |
Top
Swivel Collar |
$7.95 |
Not
Available |
FP012-1 |
Double
Swivel Collar |
$10.95 |
Not
Available |
FP013-1 |
Bottom
Swivel Collar |
$7.95 |
Not
Available |
| FP018-1 |
Top
Section Spring Button Assembly - Tube 1 |
$10.95 |
2 |
| FP019-1 |
Middle
Section Spring Button Assembly - Tube 2 |
$10.95 |
2 |
FP020-1 |
Bottom
Section Spring Button Assembly - Tube 3 |
$10.95 |
Not
Available |
| FP3011-1S |
Stainless
Steel Flag Clip |
$2.40
Each |
7 |
| FP1011 |
3"
Diameter Anodized Gold Ball |
$18.00 |
2 |
You will need to
contact the TopFlight flagpole manufacturer for any parts covered by the
five year warranty.
View
or print the Topflight Flagpole Installations Instructions and Part List Here:
TopFlight Flagpole Instructions & Part List.pdf
(1,475 KB)
Adobe Acrobat
Reader is required.
Flag Order Form
Five-Section
20 FT Aluminum
Flagpole Set
Made in the USA
|
Actual package may vary from photo.
|
Five-Section 20' Flagpole Set
Includes:
-
20' exposed height flagpole made from seamless 16 gauge
aluminum with an
anodized finish. 2" outside diameter top to bottom. The flagpole is made up of 5 sections that are swedged
on one end so they will slips together to make a smooth exterior finish when
assembled.
-
3x5' Nylon U.S. flag made with embroidered
stars and sewn stripes - Made in the USA!
-
3" diameter gold anodized aluminum ball ornament.
-
Cast aluminum truck with nylon pulley.
-
Die cast aluminum cleat.
-
Braided polypropylene halyard (rope).
-
2 Nylon snap hooks to attach the flag to the halyard.
-
20" PVC ground socket sleeve.
-
Installation and user instructions.
20' Five-Section Flagpole Set
Only $139.95
13 lbs. UPS shipping weight.
$20.00 flat UPS Ground shipping charge to the
continental 48 States.
|
Flag Order Form
|